2018.09-2021.11 根特大学（比利时），土木工程，博士

2015.09-2018.06 同济大学，建筑与土木工程，硕士

2011.09-2015.06 东南大学，道路桥梁与渡河工程，学士

国家级海外高层次青年人才计划，隧道结构混凝土3D打印，2024

上海市海外高层次人才计划，土木工程，2024

同济大学青年百人计划A类，2024

苏黎世联邦理工学院博士后研究基金（ETH Postdoc Fellowship），低碳3D打印混凝土静态混合系统的数字孪生，2023-2025

根特大学博士后专项研究基金（BOF Postdoc Fellowship），用于数字混凝土硬化调控的磁控微胶囊，2023-2025

欧盟地平线EXCITE基金第二期（EU Horizon），双管泵送3D打印混凝土骨料的空间分布，2023

欧盟地平线EXCITE基金第四期（EU Horizon），基于全域定向排列的3D打印混凝土性能增强，2024

根特大学工业研究基金（IOF），3D打印混凝土的按需双料配合比设计，2023-2025

欧盟地平线SMARTINCS’23国际会议“卓越研究奖”，2023

论文

发表SCI论文60余篇，含中科院一区顶级期刊30余篇。代表性论文如下：

[1] Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Kim Van Tittelboom, Yong Yuan, Geert De Schutter. Stiffening controllable concrete modified with redispersible polymer powder for twin-pipe printing. Cement and Concrete Research, 2022, 161: 106953.

[2] Yaxin Tao, A.V. Rahul, Karel Lesage, Yong Yuan, Kim Van Tittelboom, Geert De Schutter*. Stiffening control of cement-based materials using accelerators in inline mixing processes: Possibilities and challenges. Cement and Concrete Composites, 2021, 119: 103972.

[3] Yaxin Tao, Gieljan Vantyghem, Karel Lesage, Yong Yuan, Wouter De Corte, Kim Van Tittelboom, Geert De Schutter*. Adhesion properties of printable polymer-modified concrete for rock tunnel linings. ACI Materials Journal, 2021, 118 (6): 61-73.

[4] Yaxin Tao, A.V. Rahul, Karel Lesage, Kim Van Tittelboom ,Yong Yuan, Geert De Schutter*. Mechanical and microstructural properties of 3D printable concrete in the context of the twin-pipe pumping strategy. Cement and Concrete Composites, 2022, 125:104324.

[5] Yaxin Tao, Karel Lesage, Kim Van Tittelboom*, Yong Yuan, Geert De Schutter. Influence of substrate surface roughness and moisture content on adhesion performance of 3D printable concrete. Cement and Concrete Composites, 2022, 126: 104350.

[6] Yaxin Tao, Karel Lesage, Kim Van Tittelboom, Yong Yuan*, Geert De Schutter*. Influence of aluminum sulfate on mobility and adhesion of hydroxyethyl methyl cellulose in cement-based materials for tunnel linings. Cement and Concrete Composites, 2022, 131: 104594.

[7] Yaxin Tao*, Qiang Ren, Karel Lesage, Kim Van Tittelboom, Yong Yuan, Geert De Schutter. Shape stability of printable concrete with river and manufactured sand characterized by squeeze flow, Cement and Concrete Composites, 2022, 133: 104674.

[8] Yaxin Tao*, A.V. Rahul, Manu K. Mohan, Kim Van Tittelboom, Yong Yuan, Geert De Schutter. Blending performance of helical static mixer used for twin-pipe 3D concrete printing. Cement and Concrete Composites, 2022, 134: 104741.

[9] Qiang Ren, Yaxin Tao, Dengwu Jiao, Zhengwu Jiang*, Geert De Schutter*. Rheological properties of concrete with manufactured sand: A multi-level prediction. Cement and Concrete Composites, 2022, 133: 134647.

[10] Manu K. Mohan, A. V. Rahul, Yaxin Tao, Geert De Schutter, Kim Van Tittelboom*. Hydration re-initiation of borated CSA systems with a two-stage mixing process: An application in extrusion-based concrete 3D printing. Cement and Concrete Research, 2022, 159: 106870.

[11] Yubo Sun, Shizhe Zhang, A.V. Rahul, Yaxin Tao, Filip Van Bockstaele, Koen Dewettinck, Guang Ye, Geert De Schutter*. Rheology of alkali-activated slag pastes: New insight from microstructural investigations by cryo-SEM. Cement and Concrete Research, 2022, 157: 106806.

[12] Yaxin Tao, Karel Lesage, Kim Van Tittelboom*, Yong Yuan, Geert De Schutter. Twin-pipe pumping strategy for stiffening control of 3D printable concrete: From transportation to fabrication. Cement and Concrete Research, 2023, 168: 107137.

[13] Yaxin Tao, Qiang Ren, Gieljan Vantyghem, Karel Lesage, Kim Van Tittelboom*, Yong Yuan, Wouter De Corte, Geert De Schutter. Extending 3D concrete printing to hard rock tunnel linings: Adhesion of fresh cementitious materials for different surface inclinations. Automation in Construction, 2023, 149: 104787.

[14] Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Geert De Schutter, Kim Van Tittelboom. Development of a calcium sulfoaluminate-Portland cement binary system for twin-pipe 3D concrete printing. Cement and Concrete Composites, 2023, 138: 104960.

[15] Yaxin Tao*, A.V. Rahul, Manu K. Mohan, Geert De Schutter, Kim Van Tittelboom. Recent progress and technical challenges in using calcium sulfoaluminate (CSA) cement. Cement and Concrete Composites, 2023, 137: 104908.

[16] Yaxin Tao, Xiaodi Dai*, Geert De Schutter, Kim Van Tittelboom. Set-on-demand of alkali-activated slag mixture using twin-pipe pumping. Construction and Building Materials, 2023, 392: 132003.

[17] Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Geert De Schutter, Kim Van Tittelboom. Influence of rheology on mixing homogeneity and mechanical behavior of twin-pipe 3D printable concrete. Construction and Building Materials, 2023, 408: 133694.

[18] Xiaodi Dai, Yaxin Tao*, Kim Van Tittelboom, Geert De Schutter. Rheological and mechanical properties of 3D printable alkali-activated cements. Cement and Concrete Composites, 2023, 139: 104995.

[19] Yiyuan Zhang, Yaxin Tao, Yubo Sun, Kim Van Tittelboom, Yi Zhang, Karel Lesage, Geert De Schutter*. Active control of thixotropy of magneto-responsive cementitious materials with the intervention of time-varying magnetic fields. Cement and Concrete Research, 2024, 181: 107520.

[20] Timothy Wangler, Yaxin Tao, Arnesh Das, Matineh Mahmoudi, Seyma Gurel, Robert J. Flatt*. Aluminate 2K systems in digital concrete: Process, design, chemistry, and outlook. Cement and Concrete Research, 2024, 185: 107644.

[21] Yubo Sun, Manu K. Mohan, Yaxin Tao, Yi Zhang, Kim Van Tittelboom, Guang Ye, Geert De Schutter*. A conceptual design of two-stream alkali-activated materials. Cement and Concrete Composites, 2024, 148: 105485.

[22] Yi Zhang, Qiang Ren, Xiaodi Dai, Yaxin Tao, Yiyuan Zhang, Zhengwu Jiang*, Kim Van Tittelboom*, Geert De Schutter*. A potential active rheology control approach for 3D printable cement-based materials: Coupling of temperature and viscosity modifiers. Cement and Concrete Composites, 2024, 149: 105496.

[23] Yiyuan Zhang, Karel Lesage, Yi Zhang, Yaxin Tao, Kim Van Tittelboom, Geert De Schutter*. A comparison of magneto-responsive particles and testing protocols for active rheology control of cementitious materials. Cement and Concrete Composites, 2024, 146: 105390.

[24] Yong Yuan, Xiaoyun Wang, Jiaolong Zhang*, Yaxin Tao, Kim Van Tittelboom, Luc Taerwe, Geert De Schutter*. The shear strength of the interface between artificial rock and printed concrete at super-early ages. Frontiers of Structural and Civil Engineering, 2024, 18: 51-65.

[25] Yaxin Tao*, Yi Zhang, Xiaoyun Wang, Geert De Schutter, Kim Van Tittelboom. Adhesion evaluation and interface characterization of 3D printed concrete for automatic repair. Construction and Building Materials, 2024, 414: 134952.

[26] Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Geert De Schutter, Kim Van Tittelboom. Hydration and microstructure of calcium sulfoaluminate-Portland cement binder systems for set-on-demand applications. Materials and Structures, 2024, 57: 35.

[27] Yaxin Tao*, Jiangang Zhou, Weijiu Cui, Xinyu Shi, Geert De Schutter, Kim Van Tittelboom. Numerical assessment of plastic yielding in extrusion-based 3D concrete printing. Materials and Structures, 2024, 57: 65.

[28] Yaxin Tao, Xiaodi Dai*, Geert De Schutter, Kim Van Tittelboom. Adhesion performance of alkali-activated material for 3D printing of tunnel linings at different temperatures. Frontiers of Structural and Civil Engineering, 2024, 18: 66-79.

[29] Xiaodi Dai, Yaxin Tao*, Yi Zhang, Luchuan Ding, Kim Van Tittelboom, Geert De Schutter. Development of 3D printable alkali-activated slag-metakaolin concrete. Construction and Building Materials, 2024, 444: 137775.

[30] Weijiu Cui, Haijun Sun, Jiangang Zhou, Sheng Wang, Xinyu Shi, Yaxin Tao*. Geometric quality evaluation of 3D printable concrete using computational fluid dynamics. Frontiers of Structural and Civil Engineering, 2024, 18: 963-976.

[31] Weijiu Cui, Liang Shen, Dongsheng Ji, Wenliang Liu, Tianheng Wang, Dongshuai Hou, Wenkai Shen, Xinyu Shi, Yaxin Tao*. Mechanical performance and permeability of low-carbon printable concrete. Journal of Sustainable Cement-based Materials, 2024, 14(3), 406–416.

[32] Yubo Sun, Xinyue Zhang, Jiangang Zhou, Yilin Wang, Bo Zhang, Yiyuan Zhang, Weijiu Cui*, Yaxin Tao*. Extrudability analysis of 3D printable concrete as a two-phase discrete flow. Journal of Building Engineering, 2024, 98: 111252.

[33] Weijiu Cui, Wenliang Liu, Ruyi Guo, Da Wan, Xiaona Yu, Luchuan Ding, Yaxin Tao*. Geometrical quality inspection in 3D concrete printing using AI-assisted computer vision. Materials and Structures, 2025, 58: 68.

[34] Yiyuan Zhang, Yaxin Tao, Jose R.A. Godinho, Kim Van Tittelboom, Karel Lesage, Geert De Schutter*. Active rheology control of cementitious materials: New insights from magneto-responsive aggregates. Cement and Concrete Research, 2025, 189: 107707.

[35] Yi Zhang, Yaxin Tao, Jose R.A. Godinho, Qiang Ren, Zhengwu Jiang*, Kim Van Tittelboom*, Geert De Schutter*. Layer interface characteristics and adhesion of 3D printed cement-based materials exposed to post-printing temperature disturbance. Cement and Concrete Composites, 2025, 155: 105837.

[36] Yiyuan Zhang, Yi Zhang, Yaxin Tao, Xiaodi Dai, Kim Van Tittelboom, Karel Lesage, Geert De Schutter*. Active rheology control of cementitious materials containing hard magnetic particles: Sustained response after magnetic intervention. Cement and Concrete Composites, 2025, 160: 106024.

2025.06至今     同济大学，土木工程学院地下建筑与工程系

2023.10-2025.06  苏黎世联邦理工学院（瑞士），建筑材料系，博士后 

2021.11-2023.10  根特大学（比利时），结构工程与建筑材料系，博士后

Method for layer-by-layer deposition of concrete（美国发明专利）

Method for layer-by-layer deposition of concrete using rapidly hydrating cementitious material and bicomponent cementitious binder composition（美国发明专利）

一种实现预拌混合的混凝土3D打印喷头（实用新型专利）

一种带有微波养护功能的混凝土3D打印设备（实用新型专利）

国家重点研发计划，“新奥法”隧道工程的集约化升级及城市高质量发展示范应用，2021-2023

同济大学全球重点合作伙伴培育计划专项，3D打印混凝土数字孪生基础理论与应用，2024-2025

瑞士创新基金（Innosuisse），预制承重柱的3D混凝土打印，2023-2025

根特大学工业研究基金（IOF），用于3D打印混凝土硬化调控的双管泵送系统，2022-2023

根特大学专项研究基金（BOF），应对3D打印混凝土互斥冲突的挑战，2018-2021

国家标准《建筑增材制造 鉴定原则 结构和基础设施要素》

混凝土材料实验（苏黎世联邦理工学院），2023，2024

建模、制作与测量（根特大学），2019，2020，2021

RILEM多个技术委员会委员（PCC，ACP，ADC，PFC，MPA）

亚洲混凝土联合会3D打印混凝土技术委员会委员

中国硅酸盐学会固废与生态材料分会3D打印学术委员会委员

《建筑材料学报》青年编委

《Materials Reports: Solidwaste and Ecomaterials》青年编委

《Materials Science in Additive Manufacturing》青年编委

《Smart Construction》青年编委

《Discover Concrete and Cement》青年编委

每年招收博士生1-2名，硕士生2-3名。

极端环境建造，隧道衬砌打印，混凝土流变调控

每年引进博士后1-2名。