• 教育经历

博士后（2010.11-2011.03）	挪威科技大学结构工程系
博士（2007.09-2010.11）	英国杜伦大学（Durham University，2011年英国综合排名第六）工程与计算科学学院岩土工程专业， 学位论文：Meshless methods: theory and application in 3D fracture modelling with level sets
硕士（2005.09-2007.09）	同济大学隧道与地下建筑工程专业（*免试推荐入学）， 学位论文：基于无网格法的节理岩石边坡稳定性分析
本科（2001.09-2005.07）	同济大学土木工程专业， 学位论文：有限元边坡稳定性分析与设计

• 工作经历

教授（2016.12-至今）	同济大学土木工程学院地下建筑与工程系
副教授（2015.01-2016.12）	同济大学土木工程学院地下建筑与工程系
副研究员（2013.01-2014.12）	同济大学土木工程学院地下建筑与工程系
讲师（2010.12-2012.12）	同济大学土木工程学院地下建筑与工程系

• 主持

2016.10-2018.10 《纳米压电能量收集装置表面效应模型的优化设计与参数识别》，大连理工大学工业装备结构分析国家重点实验室开放基金项目，No.GZ1607
2016.04-2019.03 《高地应力区非常规页岩气开发水力压裂多尺度模型研究》，上海市科技启明星计划，上海市科学技术委员会，No.16QA1404000
2015.01-2018.12 《三维裂隙岩体水力耦合多尺度分析相场模型研究》，国家自然科学基金面上项目，No.51474157
2014.07-2015.11 欧盟第七框架FP7玛丽—居里国际人才计划， No.IIF-GA-2013-623667
2014.01-2014.12 《三维多节理贯通及非局部破坏行为的无网格法模拟研究》，NSFC-DFG（中国国家自然基金委-德意志联合研究会）国际交流项目，No.51311130490
2012.09-2014.09 《岩体三维节理破坏演化过程无网格模拟研究》，上海市晨光计划，上海市教委，上海市教育发展基金会，No.12CG20
2012.09-2014.09 《城市轨道交通盾构管片结构长期运营开裂破坏过程精细化模拟方法研究》，上海市浦江人才计划，上海市科学技术委员会，No.12PJ1409100
2012.04-2014.04 《隧道围岩稳定性分析的统一非连续方法研究》，教育部，中央高校基本科研项目，No.0230219136
2012.01-2014.12 《岩石边坡三维交叉节理动态扩展过程的水平集追踪与无网格法模拟研究》，国家自然科学基金青年基金，No.51109162

• 参与

2012.01-2016.12 《隧道围岩稳定性三维精细化模拟方法与应用》，国家自然科学基金重点项目，No.41130751
2011.12-2016.12 《城市轨道交通地下结构性能演化与感控基础理论》，973国家重大科学基础研究计划，No. 2011CB013800
2011.09-2015.09 《内蒙古电网压气储能示范工程》，863国家高技术研究发展计划，中国科学技术部，No. 2012AA052501

• 论文

1.学术专著
Xiaoying Zhuang, Meshless methods for 3D fracture modelling with level sets, Lambert Academic Publication, Saarbrucken, Germany, 2012, ISBN 978-3-8473-1818-7.

2.期刊论文
已发表/录用待刊
[1] K.M. Hamdia, M. Silanie, X. Zhuang, P. He, T. Rabczuk. A novel stochastic model to predict the fracture toughness of nano particle reinforced polymeric composites, paper in press, 2017.
[2] W. Wu, X. Zhuang*, H. Zhu, Y. Cai, X. Liu. Centroid Sliding Pyramid Method for Two Dimensional Stability Analysis of Discontinuous Rock Masses. Acta Geotechnica, doi: 10.1007/s11440-016-0510-4, 2017.
[3] H. Zhu, W. Wu, X. Zhuang, Y. Cai. Method for estimating normal contact parameters in collision modeling using discontinuous deformation analysis. ASCE International Journal of Geomechanics, 17:E4016011, 2017.
[4] G. Liu, X. Zhuang*, Z. Cui. Three-dimensional slope stability analysis using independent cover based numerical manifold and vector method. Engineering Geology, paper in press, 2017.
[5] Y. Shen, P. He, X. Zhuang. Fracture Model for the prediction of the Electrical percolation threshold in CNTs/Polymer composites, Frontiers of Structural & Civil Engineering, paper in press, 2017.
[6] N. Nguyen-Thanh, K. Zhou, X. Zhuang, P. Aerias, H. Nguyen-Xuan, Y. Bazilevs, T. Rabczuk. Isogeometric multiple patches thin shells analysis based on rational splines over hierarchical T-meshes. Computer Methods in Applied Mechanics and Engineering, DOI: 10.1016/j.cma.2016.12.002, 2017.
[7] T. Quoc-Thai, T. Rabczuk, X. Zhuang*. Numerical study for cohesive zone model in delamination analysis based on higher-order B-spline functions, Journal of Micromechanics and Molecular Physics, 2:1750004, 2017.
[8] H. Ren, X. Zhuang*, T. Rabczuk. Dual horizon peridynamics: a stable solution to varying horizon, Computer Methods in Applied Mechanics and Engineering, 318:768-782, 2017.
[9] X. Zhuang, Q. Wang, H. Zhu. Effective properties of composites with periodic random packing of ellipsoids. Materials, doi:10.3390/ma10020112, 2017.
[10] Z. Dai, H. Ren, X. Zhuang*, T. Rabczuk. Dual-Support Smoothed Particle Hydrodynamics for Elastic Mechanics, International Journal of Computational Methods, 14:1750039, 2017.
[11] B.H. Nguyen, H.D. Tran, C. Anitescu, X. Zhuang, and T. Rabczuk. An Isogeometric Symmetric Galerkin Boundary Element Method for Elastostatic Analysis, Computer Methods in Applied Mechanics & Engineering, 306:252-275, 2016.
[12] Z. Lu, W. Li, X. Zhuang, T. Rabczuk. Quantitative assessment of engineering geological suitability for multilayer Urban Underground Space, Tunnelling and Underground Space Technology, 59:65-76, 2016.
[13] H. Ren, X. Zhuang*, T. Rabczuk. A new peridynamic formulation with shear deformation for elastic solid. Journal of Micromechanics and Molecular Physics, 1:1650009, 2016.
[14] X. Zhuang, Q. Wang, H. Zhu. Multiscale modelling of hydro-mechanical couplings in quasibrittle materials, International Journal of Fractures, doi: 10.1007/s10704-016-0139-1, 2016.
[15] N. Vu-Bac, T. Lahmer, X. Zhuang, T. Nguyen-Thoi, T. Rabczuk. A software framework for probablistic sensitivity analysis for computationally expensive models, Advances in Software Engineering, doi:10.1016/j.advengsoft.2016.06.005, 2016.
[16] H. Ren, X. Zhuang*, Y. Cai, T. Rabczuk. Dual-horizon peridynamics, International Journal for Numerical Methods in Engineering, 108:1451-1476, 2016.
[17] B. He, B. Mortazavi, X. Zhuang*, T. Rabczuk. Modeling Kapitza Resistance of Two-Phase Composite Material, Composite Structures, 152:939-946, 2016.
[18] A.A. Mousavi, B. Arash, X. Zhuang, T. Rabczuk. A coarse-grained model for the elastic properties of cross linked short carbon nanotube/polymer composites, Composites Part B, 95:404-411, 2016.
[19] S. Nantha, T. Lahmer, X. Zhuang*, H.S. Park, T. Rabczuk. Topology Optimization of Piezoelectric Nanostructures, Journal of the Mechanics and Physics of Solids, 94:316-335, 2016.
[20] K.M. Hamdia, X. Zhuang, P. He, T. Rabczuk. Fracture toughness of polymeric particle nanocomposites:Evaluation of Models performance using Bayesian method, Composite Science & Technology, 126:122-129, 2016.
[21] A. Msekh, M. Silani, M. Jamshidian, P. Areias, X. Zhuang, G. Zi, P. He, T. Rabczuk. Predictions of J integral and tensile strength of clay/epoxy nanocomposites material using phase field model, Composites Part B, 93: 97-114 2016.
[22] H. Zhu, W. Wu, J. Chen, G. Ma, X. Zhuang. Integration of three dimensional discontinuous deformation analysis (DDA) with binocular photogrammetry for stability analysis of tunnels in blocky rock mass. Tunneling and Underground Space Technology, 51:30-40, 2016.
[23] H. Zhu, Q. Wang, X. Zhuang*. A nonlinear semi-concurrent multiscale method for fractures. International Journal of Impact Engineering, 87:65-82, 2016.
[24] K.H. Hamdia, M.A. Msekh, M. Silania, N. Vu-Bac, X. Zhuang, T.Nguyen-Thoi, T. Rabczuk. Uncertainty quantification of fracture properties of polymeric nanocomposites based on phase field modeling, Composite Structures, 133:1177-1190, 2015.
[25] S.S. Nanthakumar, T. Lamher, X. Zhuang*, G. Zi, T. Rabczuk. Detections of material interface using a regularized level set method in piezoelectric structures. Inverse Problems in Science & Engineering, 24:153-176, 2015.
[26] M. Bayat, S.Sh. Ghorashi, J.Amani, L.Andersen, L.B. Ibsen, T.Rabczuk, X. Zhuang, H.Talebi. Recovery-Based Error Estimation in the Dynamic Analysis of Offshore Wind Turbine Monopile Foundations. Computers & Geotechnics, 70:24-40, 2015.
[27] S. Quayum, X. Zhuang*, T. Rabczuk. Computational model generation and RVE design of self-healing concrete. Frontiers of Structural and Civil Engineering, 9:383-396, 2015.
[28] H. Ghasemi, R. Brighenti, X. Zhuang*, J. Muthu, T. Rabczuk. Optimal fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach. Structural and Multidisciplinary Optimization, 51: 99-112, 2015.
[29] N. Vu-Bac, M. Silani, T. Lahmer, X. Zhuang*, T. Rabczuk. A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Computational Materials Science: Part B, 96: 520-535, 2015.
[30] N. Nguyen-Thanh, N. Valizadeh, M.N. Nguyen, H. Nguyen-Xuan, X. Zhuang, P. Areias, G. Zi, Y. Bazilevs, L. de Lorenzis, T. Rabczuk. An extended isogeometric thin shell analysis based on Kirchhoff-Love theory, Computer Methods in Applied Mechanics & Engineering, 284: 265-291, 2015.
[31] X. Zhuang, Q. Wang, H. Zhu. A 3D computational homogenization model for porous material and parameters identification. Computational Materials Science, 96: 536-548, 2015.
[32] N. Vu-Bac, R. Rafiee, T. Lahmer, X. Zhuang*, T. Rabczuk. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Composites Part B: Engineering, 68: 446-464, 2014.
[33] H. Zhu, Y. Zuo, X. Li, J. Deng, X. Zhuang. Estimation of fracture diameter distribution using maximum entropy principle. International Journal of Rock Mechanics and Mining Sciences, 72: 127-137, 2014.
[34] Y. Zhang, X. Zhuang*, J. Muthu, T. Mabrouki, M. Fontaine, Y. Gong, T. Rabczuk. Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation. Composites Part B: Engineering, 63: 27-33, 2014.
[35] W. Zheng, X. Zhuang*, D.D. Tannant, Y. Cai, S. Nunoo. Unified continuum/discontinuum modeling framework for slope stability assessment. Engineering Geology, 179: 90-101, 2014.
[36] X. Zhuang, J. Chun, H. Zhu. A comparative study on unfilled and filled crack propagation for rock-like brittle material. Theoretical and Applied Fracture Mechanics, 72: 110-120, 2014.
[37] H. Ghasemi, R. Rafiee, X. Zhuang, J. Muthu, T. Rabczuk. Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling. Computational Materials Science, 85: 295-305 2014.
[38] W. Wu, H. Zhu H, X. Zhuang*, G. Ma, Y. Cai. A multi-shell cover algorithm for contact detection in the three dimensional discontinuous deformation analysis. Theoretical and Applied Fracture Mechanics, 72: 136-149, 2014.
[39] E. Li, X. Zhuang*, W. Zheng, Y. Cai, H. Zhu. Effect of graph generation on slope stability analysis based on graph theory. Journal of Rock Mechanics and Geotechnical Engineering, 6: 380-386, 2014.
[40] P. Budarapu, R. Gracie, S-W. Yang, X. Zhuang*, T. Rabczuk. Efficient coarse graining in multiscale modeling of fracture. Theoretical and Applied Fracture Mechanics, 69: 126-143 , 2014.
[41] X. Zhuang, Y. Cai, C. Augarde. A meshless sub-region radial point interpolation method for accurate calculation of crack tip fields. Theoretical and Applied Fracture Mechanics, 69: 118-125, 2014.
[42] X. Zhuang*, H. Zhu, C. Augarde. An improved meshless Shepard and least square method possessing the delta property and requiring no singular weight function. Computational Mechanics, 53: 343-357, 2014.
[43] N. Vu-Bac, T. Lahmer, Y. Zhang, X. Zhuang*, T. Rabczuk. Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs). Composites Part B, 59: 80-95 , 2014.
[44] X. Zhuang, R. Huang, T. Rabczuk, C. Liang. A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage. Mathematical Problems in Engineering, article ID: 179169, 2014.
[45] X. Zhuang, Y.C. Cai. A meshless local Petrov-Galerkin Shepard and least-squares method based on duo nodal supports. Mathematical Problems in Engineering, article ID: 806142, 2014.
[46] H. Ghasemi, R. Brighenti, X. Zhuang*, J. Muthu, T. Rabczuk. Optimization of fiber dispersion in fiber reinforced composite by using B-spline finite elements. Computational Materials Science, 85:463-473, 2014.
[47] N. Vu-Bac, T. Lahmer, H. Keitel, J. Zhao, X. Zhuang*, T. Rabczuk. Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mechanics of Materials, 68:70-84, 2014.
[48] X. Li, Y. Zuo, X. Zhuang*, H. Zhu. Estimation of fracture trace length distributions using probability weighted moments and L-moments. Engineering Geology, 168: 69-85, 2014.
[49] Y. Cai, H. Zhu, X. Zhuang. A continuous/discontinuous deformation analysis (CDDA) method based on deformable blocks for fracture modelling. Frontiers of Structural & Civil Engineering, 7:369-378, 2014.
[50] N. Nguyen-Thanh, J. Muthu, X. Zhuang*, T. Rabczuk. An adaptive three-dimensional RHTsplines formulation in linear elasto-statics and elasto-dynamics. Computational Mechanics, 53:369-385, 2013.
[51] X. Zhuang, R. Huang, H. Zhu, H. Askes, K. Mathisen. A new and simple locking-free triangular thick plate element using independent shear degrees of freedom. Finite Elements in Analysis and Design, 75:1-7, 2013.
[52] J-W Jiang, X. Zhuang, T. Rabczuk. Orientation dependent intrinsic thermal conductivity in single-layer MoS2. Scientific Reports, arXiv:1303.5548, 10.0.4.14/srep02209, 2013.
[53] Y. Cai, X. Zhuang*, H. Zhu. A generalized and efficient method for finite cover generation in the numerical manifold method. International Journal of Computational Methods, 10(5): 1350028, 2013.
[54] N. Vu-Bac, H. Nguyen-Xuan, L. Chen, S. Bordas, X. Zhuang*, G.R. Liu, T. Rabczuk. A Phantom-Node method with edge-based strain smoothing for linear elastic fracture mechanics. Journal of Applied Mathematics, doi:10.1155/2013/978026, 2013.
[55] Y. Jia, Y. Zhang, G. Xu, X. Zhuang*, T. Rabczuk. Reproducing Kernel Triangular Bspline-based FEM for Solving PDEs. Computer Methods in Applied Mechanics & Engineering, 267:342-358, 2013.
[56] Y. Zhang, G. Chen, L. Zheng, Y. Li, X. Zhuang. Effects of geometries on three-dimensional slope stability, Canadian Geotechnical Journal, 50:233-249, 2013.
[57] F. Huang, H. Zhu, Q. Xu, Y. Cai, X. Zhuang. The effect of weak interlayer on the failure pattern of rock mass around tunnel - Scaled model tests and numerical analysis. Tunnelling and Underground Space Technology, 35:207-218, 2013.
[58] X. Zhuang, C. Augarde and K. Mathisen. Fracture modelling using meshless methods and level sets in 3D: framework and modelling. International Journal for Numerical Methods in Engineering, 92:969-998, 2012.
[59] W. Zheng, X. Zhuang, Y. Cai. A new method for seismic stability analysis of anchored rock slope and its application in anchor optimization. Frontiers of Structural and Civil Engineering, 6:111-120, 2012.
[60] X. Zhuang, C. Heaney, C. Augarde. On error control in the element-free Galerkin method. Engineering Analysis with Boundary Elements, 36:351-360, 2012.
[61] Y. Zhang, G. Chen, J. Wu, L. Zheng, X. Zhuang. Numerical Simulation of Seismic Slope Stability Analysis Based on Tension-Shear Failure Mechanism. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 43: 18-28, 2012.
[62] X. Zhuang, C. Augarde and S. Bordas. Accurate fracture modelling using meshless methods and level sets: formulation and 2D modelling. International Journal for Numerical Methods in Engineering, 86:249-268, 2011.
[63] H. Zhu, X. Li, X. Zhuang. Recent advances of digitization in rock mechanics and rock engineering. Journal of Rock Mechanics and Geotechnical Engineering, 3:220-233, 2011.
[64] H. Zhu, X. Zhuang, Y. Cai. High rock slope stability analysis using the enriched meshless Shepard and least squares method. International Journal of Computational Methods, 8:209228, 2011.
[65] X. Zhuang, C. Augarde. Aspects of the use of orthogonal basis functions in the element free Galerkin method. International Journal for Numerical Methods in Engineering, 81:366-380 , 2010.
[66] Y. Cai, X. Zhuang, C. Augarde. A new partition of unity finite element free from linear dependence problem and processing delta property. Computer Methods in Applied Mechanics & Engineering, 199:1036-1043, 2010.
[67] X. Zhuang, H. Zhu, Y. Cai. High rock slope stability analysis using the meshless Shepard and least squares method. Analysis of dscontinuous deformation: new developments and applications: 405-411, 2009.
[68] X. Zhuang, R. Huang, H. Zhu. Modelling 2D joint propagation in rock using the meshless methods and level sets. Chinese Journal of Rock Mechanics and Engineering, 31:2187-2196 , 2012.
[69] W. Zheng, X. Zhuang*, Y. Cai, F. Xue. A study on the modeling of prestressed anchors in rock slope and optimization. Chinese Journal of Geotechnical Engineering, 34:1668-1676 , 2012.
[70] X. Li, Y. Cai and X. Zhuang, H. Zhu. Design of permeable lining for high pressure hydraulic tunnel. Chinese Journal of Rock and Soil Mechanics, 30:1403-1408, 2009.
[71] X. Zhuang, Y. Cai, H. Zhu. An FEM modelling method for anchored slope stability analysis and discussions on anchoring effect. Chinese journal of Geotechnical Engineering, 30:10991104, 2008.
[72] X. Zhuang, Y. Cai, H. Zhu, D. Zhou. Rock slope stability analysis based on meshless method and shortest path algorithms. Chinese Quarterly of Mechanics, 29: 537-543, 2008.
[73] J. Fang, H. Zhu, X. Zhuang. Appraisal and analysis of three-dimensional slope stability based on elastic-plastic FEM, Rock and Soil Mechanics, 29:2667-2672, 2008.
[74] J. Fang, Y. Lin, X. Zhuang. A study on integrated technique with root pile and bag-form concrete in dealing with underwater slope. Chinese Journal of Underground Space and Engineering, 3:187-192, 2007.

3.专著章节
[1] A. Huerta, T. Belytschko, S. Fernndez-Mndez, T. Rabczuk, X. Zhuang, M. Arroyo. Meshfree Methods, in Encyclopedia of Computational Mechanics(ECM2) - Article ID: ecm005, Wiley, 2017.
[2] T. Rabczuk, X. Zhuang. Meshless discretization methods, Springer Encyclopedia of Continuum Mechanics, 2017
[3] T. Rabczuk, X. Zhuang, Impact Mechanics, Springer Encyclopedia of Continuum Mechanics, 2017.
[4] T. Rabczuk, X. Zhuang, N. Vu-Bac. Continuum/Finite Element Modeling of CNRPs in Stochastic Multi-scale Modeling of CNT/Polymer, Springer, 2017.
[5] T. Rabczuk, X. Zhuang, S. Silani. Computational Multiscale Modeling of Carbon-Nanotube Reinforced Polymers, Springer, 2017.1.学术专著

Xiaoying Zhuang, Meshless methods for 3D fracture modelling with level sets, Lambert Academic Publication, Saarbrucken, Germany, 2012, ISBN 978-3-8473-1818-7.

2.期刊论文
已发表/录用待刊
[1] K.M. Hamdia, M. Silanie, X. Zhuang, P. He, T. Rabczuk. A novel stochastic model to predict the fracture toughness of nano particle reinforced polymeric composites, paper in press, 2017.
[2] W. Wu, X. Zhuang*, H. Zhu, Y. Cai, X. Liu. Centroid Sliding Pyramid Method for Two Dimensional Stability Analysis of Discontinuous Rock Masses. Acta Geotechnica, doi: 10.1007/s11440-016-0510-4, 2017.
[3] H. Zhu, W. Wu, X. Zhuang, Y. Cai. Method for estimating normal contact parameters in collision modeling using discontinuous deformation analysis. ASCE International Journal of Geomechanics, 17:E4016011, 2017.
[4] G. Liu, X. Zhuang*, Z. Cui. Three-dimensional slope stability analysis using independent cover based numerical manifold and vector method. Engineering Geology, paper in press, 2017.
[5] Y. Shen, P. He, X. Zhuang. Fracture Model for the prediction of the Electrical percolation threshold in CNTs/Polymer composites, Frontiers of Structural & Civil Engineering, paper in press, 2017.
[6] N. Nguyen-Thanh, K. Zhou, X. Zhuang, P. Aerias, H. Nguyen-Xuan, Y. Bazilevs, T. Rabczuk. Isogeometric multiple patches thin shells analysis based on rational splines over hierarchical T-meshes. Computer Methods in Applied Mechanics and Engineering, DOI: 10.1016/j.cma.2016.12.002, 2017.
[7] T. Quoc-Thai, T. Rabczuk, X. Zhuang*. Numerical study for cohesive zone model in delamination analysis based on higher-order B-spline functions, Journal of Micromechanics and Molecular Physics, 2:1750004, 2017.
[8] H. Ren, X. Zhuang*, T. Rabczuk. Dual horizon peridynamics: a stable solution to varying horizon, Computer Methods in Applied Mechanics and Engineering, 318:768-782, 2017.
[9] X. Zhuang, Q. Wang, H. Zhu. Effective properties of composites with periodic random packing of ellipsoids. Materials, doi:10.3390/ma10020112, 2017.
[10] Z. Dai, H. Ren, X. Zhuang*, T. Rabczuk. Dual-Support Smoothed Particle Hydrodynamics for Elastic Mechanics, International Journal of Computational Methods, 14:1750039, 2017.
[11] B.H. Nguyen, H.D. Tran, C. Anitescu, X. Zhuang, and T. Rabczuk. An Isogeometric Symmetric Galerkin Boundary Element Method for Elastostatic Analysis, Computer Methods in Applied Mechanics & Engineering, 306:252-275, 2016.
[12] Z. Lu, W. Li, X. Zhuang, T. Rabczuk. Quantitative assessment of engineering geological suitability for multilayer Urban Underground Space, Tunnelling and Underground Space Technology, 59:65-76, 2016.
[13] H. Ren, X. Zhuang*, T. Rabczuk. A new peridynamic formulation with shear deformation for elastic solid. Journal of Micromechanics and Molecular Physics, 1:1650009, 2016.
[14] X. Zhuang, Q. Wang, H. Zhu. Multiscale modelling of hydro-mechanical couplings in quasibrittle materials, International Journal of Fractures, doi: 10.1007/s10704-016-0139-1, 2016.
[15] N. Vu-Bac, T. Lahmer, X. Zhuang, T. Nguyen-Thoi, T. Rabczuk. A software framework for probablistic sensitivity analysis for computationally expensive models, Advances in Software Engineering, doi:10.1016/j.advengsoft.2016.06.005, 2016.
[16] H. Ren, X. Zhuang*, Y. Cai, T. Rabczuk. Dual-horizon peridynamics, International Journal for Numerical Methods in Engineering, 108:1451-1476, 2016.
[17] B. He, B. Mortazavi, X. Zhuang*, T. Rabczuk. Modeling Kapitza Resistance of Two-Phase Composite Material, Composite Structures, 152:939-946, 2016.
[18] A.A. Mousavi, B. Arash, X. Zhuang, T. Rabczuk. A coarse-grained model for the elastic properties of cross linked short carbon nanotube/polymer composites, Composites Part B, 95:404-411, 2016.
[19] S. Nantha, T. Lahmer, X. Zhuang*, H.S. Park, T. Rabczuk. Topology Optimization of Piezoelectric Nanostructures, Journal of the Mechanics and Physics of Solids, 94:316-335, 2016.
[20] K.M. Hamdia, X. Zhuang, P. He, T. Rabczuk. Fracture toughness of polymeric particle nanocomposites:Evaluation of Models performance using Bayesian method, Composite Science & Technology, 126:122-129, 2016.
[21] A. Msekh, M. Silani, M. Jamshidian, P. Areias, X. Zhuang, G. Zi, P. He, T. Rabczuk. Predictions of J integral and tensile strength of clay/epoxy nanocomposites material using phase field model, Composites Part B, 93: 97-114 2016.
[22] H. Zhu, W. Wu, J. Chen, G. Ma, X. Zhuang. Integration of three dimensional discontinuous deformation analysis (DDA) with binocular photogrammetry for stability analysis of tunnels in blocky rock mass. Tunneling and Underground Space Technology, 51:30-40, 2016.
[23] H. Zhu, Q. Wang, X. Zhuang*. A nonlinear semi-concurrent multiscale method for fractures. International Journal of Impact Engineering, 87:65-82, 2016.
[24] K.H. Hamdia, M.A. Msekh, M. Silania, N. Vu-Bac, X. Zhuang, T.Nguyen-Thoi, T. Rabczuk. Uncertainty quantification of fracture properties of polymeric nanocomposites based on phase field modeling, Composite Structures, 133:1177-1190, 2015.
[25] S.S. Nanthakumar, T. Lamher, X. Zhuang*, G. Zi, T. Rabczuk. Detections of material interface using a regularized level set method in piezoelectric structures. Inverse Problems in Science & Engineering, 24:153-176, 2015.
[26] M. Bayat, S.Sh. Ghorashi, J.Amani, L.Andersen, L.B. Ibsen, T.Rabczuk, X. Zhuang, H.Talebi. Recovery-Based Error Estimation in the Dynamic Analysis of Offshore Wind Turbine Monopile Foundations. Computers & Geotechnics, 70:24-40, 2015.
[27] S. Quayum, X. Zhuang*, T. Rabczuk. Computational model generation and RVE design of self-healing concrete. Frontiers of Structural and Civil Engineering, 9:383-396, 2015.
[28] H. Ghasemi, R. Brighenti, X. Zhuang*, J. Muthu, T. Rabczuk. Optimal fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach. Structural and Multidisciplinary Optimization, 51: 99-112, 2015.
[29] N. Vu-Bac, M. Silani, T. Lahmer, X. Zhuang*, T. Rabczuk. A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Computational Materials Science: Part B, 96: 520-535, 2015.
[30] N. Nguyen-Thanh, N. Valizadeh, M.N. Nguyen, H. Nguyen-Xuan, X. Zhuang, P. Areias, G. Zi, Y. Bazilevs, L. de Lorenzis, T. Rabczuk. An extended isogeometric thin shell analysis based on Kirchhoff-Love theory, Computer Methods in Applied Mechanics & Engineering, 284: 265-291, 2015.
[31] X. Zhuang, Q. Wang, H. Zhu. A 3D computational homogenization model for porous material and parameters identification. Computational Materials Science, 96: 536-548, 2015.
[32] N. Vu-Bac, R. Rafiee, T. Lahmer, X. Zhuang*, T. Rabczuk. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Composites Part B: Engineering, 68: 446-464, 2014.
[33] H. Zhu, Y. Zuo, X. Li, J. Deng, X. Zhuang. Estimation of fracture diameter distribution using maximum entropy principle. International Journal of Rock Mechanics and Mining Sciences, 72: 127-137, 2014.
[34] Y. Zhang, X. Zhuang*, J. Muthu, T. Mabrouki, M. Fontaine, Y. Gong, T. Rabczuk. Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation. Composites Part B: Engineering, 63: 27-33, 2014.
[35] W. Zheng, X. Zhuang*, D.D. Tannant, Y. Cai, S. Nunoo. Unified continuum/discontinuum modeling framework for slope stability assessment. Engineering Geology, 179: 90-101, 2014.
[36] X. Zhuang, J. Chun, H. Zhu. A comparative study on unfilled and filled crack propagation for rock-like brittle material. Theoretical and Applied Fracture Mechanics, 72: 110-120, 2014.
[37] H. Ghasemi, R. Rafiee, X. Zhuang, J. Muthu, T. Rabczuk. Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling. Computational Materials Science, 85: 295-305 2014.
[38] W. Wu, H. Zhu H, X. Zhuang*, G. Ma, Y. Cai. A multi-shell cover algorithm for contact detection in the three dimensional discontinuous deformation analysis. Theoretical and Applied Fracture Mechanics, 72: 136-149, 2014.
[39] E. Li, X. Zhuang*, W. Zheng, Y. Cai, H. Zhu. Effect of graph generation on slope stability analysis based on graph theory. Journal of Rock Mechanics and Geotechnical Engineering, 6: 380-386, 2014.
[40] P. Budarapu, R. Gracie, S-W. Yang, X. Zhuang*, T. Rabczuk. Efficient coarse graining in multiscale modeling of fracture. Theoretical and Applied Fracture Mechanics, 69: 126-143 , 2014.
[41] X. Zhuang, Y. Cai, C. Augarde. A meshless sub-region radial point interpolation method for accurate calculation of crack tip fields. Theoretical and Applied Fracture Mechanics, 69: 118-125, 2014.
[42] X. Zhuang*, H. Zhu, C. Augarde. An improved meshless Shepard and least square method possessing the delta property and requiring no singular weight function. Computational Mechanics, 53: 343-357, 2014.
[43] N. Vu-Bac, T. Lahmer, Y. Zhang, X. Zhuang*, T. Rabczuk. Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs). Composites Part B, 59: 80-95 , 2014.
[44] X. Zhuang, R. Huang, T. Rabczuk, C. Liang. A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage. Mathematical Problems in Engineering, article ID: 179169, 2014.
[45] X. Zhuang, Y.C. Cai. A meshless local Petrov-Galerkin Shepard and least-squares method based on duo nodal supports. Mathematical Problems in Engineering, article ID: 806142, 2014.
[46] H. Ghasemi, R. Brighenti, X. Zhuang*, J. Muthu, T. Rabczuk. Optimization of fiber dispersion in fiber reinforced composite by using B-spline finite elements. Computational Materials Science, 85:463-473, 2014.
[47] N. Vu-Bac, T. Lahmer, H. Keitel, J. Zhao, X. Zhuang*, T. Rabczuk. Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mechanics of Materials, 68:70-84, 2014.
[48] X. Li, Y. Zuo, X. Zhuang*, H. Zhu. Estimation of fracture trace length distributions using probability weighted moments and L-moments. Engineering Geology, 168: 69-85, 2014.
[49] Y. Cai, H. Zhu, X. Zhuang. A continuous/discontinuous deformation analysis (CDDA) method based on deformable blocks for fracture modelling. Frontiers of Structural & Civil Engineering, 7:369-378, 2014.
[50] N. Nguyen-Thanh, J. Muthu, X. Zhuang*, T. Rabczuk. An adaptive three-dimensional RHTsplines formulation in linear elasto-statics and elasto-dynamics. Computational Mechanics, 53:369-385, 2013.
[51] X. Zhuang, R. Huang, H. Zhu, H. Askes, K. Mathisen. A new and simple locking-free triangular thick plate element using independent shear degrees of freedom. Finite Elements in Analysis and Design, 75:1-7, 2013.
[52] J-W Jiang, X. Zhuang, T. Rabczuk. Orientation dependent intrinsic thermal conductivity in single-layer MoS2. Scientific Reports, arXiv:1303.5548, 10.0.4.14/srep02209, 2013.
[53] Y. Cai, X. Zhuang*, H. Zhu. A generalized and efficient method for finite cover generation in the numerical manifold method. International Journal of Computational Methods, 10(5): 1350028, 2013.
[54] N. Vu-Bac, H. Nguyen-Xuan, L. Chen, S. Bordas, X. Zhuang*, G.R. Liu, T. Rabczuk. A Phantom-Node method with edge-based strain smoothing for linear elastic fracture mechanics. Journal of Applied Mathematics, doi:10.1155/2013/978026, 2013.
[55] Y. Jia, Y. Zhang, G. Xu, X. Zhuang*, T. Rabczuk. Reproducing Kernel Triangular Bspline-based FEM for Solving PDEs. Computer Methods in Applied Mechanics & Engineering, 267:342-358, 2013.
[56] Y. Zhang, G. Chen, L. Zheng, Y. Li, X. Zhuang. Effects of geometries on three-dimensional slope stability, Canadian Geotechnical Journal, 50:233-249, 2013.
[57] F. Huang, H. Zhu, Q. Xu, Y. Cai, X. Zhuang. The effect of weak interlayer on the failure pattern of rock mass around tunnel - Scaled model tests and numerical analysis. Tunnelling and Underground Space Technology, 35:207-218, 2013.
[58] X. Zhuang, C. Augarde and K. Mathisen. Fracture modelling using meshless methods and level sets in 3D: framework and modelling. International Journal for Numerical Methods in Engineering, 92:969-998, 2012.
[59] W. Zheng, X. Zhuang, Y. Cai. A new method for seismic stability analysis of anchored rock slope and its application in anchor optimization. Frontiers of Structural and Civil Engineering, 6:111-120, 2012.
[60] X. Zhuang, C. Heaney, C. Augarde. On error control in the element-free Galerkin method. Engineering Analysis with Boundary Elements, 36:351-360, 2012.
[61] Y. Zhang, G. Chen, J. Wu, L. Zheng, X. Zhuang. Numerical Simulation of Seismic Slope Stability Analysis Based on Tension-Shear Failure Mechanism. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 43: 18-28, 2012.
[62] X. Zhuang, C. Augarde and S. Bordas. Accurate fracture modelling using meshless methods and level sets: formulation and 2D modelling. International Journal for Numerical Methods in Engineering, 86:249-268, 2011.
[63] H. Zhu, X. Li, X. Zhuang. Recent advances of digitization in rock mechanics and rock engineering. Journal of Rock Mechanics and Geotechnical Engineering, 3:220-233, 2011.
[64] H. Zhu, X. Zhuang, Y. Cai. High rock slope stability analysis using the enriched meshless Shepard and least squares method. International Journal of Computational Methods, 8:209228, 2011.
[65] X. Zhuang, C. Augarde. Aspects of the use of orthogonal basis functions in the element free Galerkin method. International Journal for Numerical Methods in Engineering, 81:366-380 , 2010.
[66] Y. Cai, X. Zhuang, C. Augarde. A new partition of unity finite element free from linear dependence problem and processing delta property. Computer Methods in Applied Mechanics & Engineering, 199:1036-1043, 2010.
[67] X. Zhuang, H. Zhu, Y. Cai. High rock slope stability analysis using the meshless Shepard and least squares method. Analysis of dscontinuous deformation: new developments and applications: 405-411, 2009.
[68] X. Zhuang, R. Huang, H. Zhu. Modelling 2D joint propagation in rock using the meshless methods and level sets. Chinese Journal of Rock Mechanics and Engineering, 31:2187-2196 , 2012.
[69] W. Zheng, X. Zhuang*, Y. Cai, F. Xue. A study on the modeling of prestressed anchors in rock slope and optimization. Chinese Journal of Geotechnical Engineering, 34:1668-1676 , 2012.
[70] X. Li, Y. Cai and X. Zhuang, H. Zhu. Design of permeable lining for high pressure hydraulic tunnel. Chinese Journal of Rock and Soil Mechanics, 30:1403-1408, 2009.
[71] X. Zhuang, Y. Cai, H. Zhu. An FEM modelling method for anchored slope stability analysis and discussions on anchoring effect. Chinese journal of Geotechnical Engineering, 30:10991104, 2008.
[72] X. Zhuang, Y. Cai, H. Zhu, D. Zhou. Rock slope stability analysis based on meshless method and shortest path algorithms. Chinese Quarterly of Mechanics, 29: 537-543, 2008.
[73] J. Fang, H. Zhu, X. Zhuang. Appraisal and analysis of three-dimensional slope stability based on elastic-plastic FEM, Rock and Soil Mechanics, 29:2667-2672, 2008.
[74] J. Fang, Y. Lin, X. Zhuang. A study on integrated technique with root pile and bag-form concrete in dealing with underwater slope. Chinese Journal of Underground Space and Engineering, 3:187-192, 2007.

3.专著章节
[1] A. Huerta, T. Belytschko, S. Fernndez-Mndez, T. Rabczuk, X. Zhuang, M. Arroyo. Meshfree Methods, in Encyclopedia of Computational Mechanics(ECM2) - Article ID: ecm005, Wiley, 2017.
[2] T. Rabczuk, X. Zhuang. Meshless discretization methods, Springer Encyclopedia of Continuum Mechanics, 2017
[3] T. Rabczuk, X. Zhuang, Impact Mechanics, Springer Encyclopedia of Continuum Mechanics, 2017.
[4] T. Rabczuk, X. Zhuang, N. Vu-Bac. Continuum/Finite Element Modeling of CNRPs in Stochastic Multi-scale Modeling of CNT/Polymer, Springer, 2017.
[5] T. Rabczuk, X. Zhuang, S. Silani. Computational Multiscale Modeling of Carbon-Nanotube Reinforced Polymers, Springer, 2017.

• 专利

(1) 庄晓莹，朱合华，春军伟 等. 一种能精确定位充填型预制裂隙的类岩石试样模具，专利公开，201310073165.7 
(2) 徐前卫，唐卓华，朱合华 等. 一种大型真三轴剪切试验装置及其应用，专利公开，201310647648.3 
(3) 徐前卫，朱合华，唐卓华 等. 可模拟泥水平衡盾构施工的室内模型试验装置及使用方法 ，专利公开，201310323107.5 
(4) 武威，朱合华，徐前卫 等. 薄膜式土压力传感器标定装置及标定方法，专利公开，201210024767.9 
(5) 徐前卫，朱合华，唐卓华 等. 一种可进行锚杆拉拔力测试的模拟装置及其试验方法，专利公开，201310024120.0 
(6) 朱合华，武威，徐前卫 等. 岩土体内部位移量测系统，专利公开，201210026718.9 
(7) 朱合华，武威，徐前卫 等. 岩土体应力测量系统，专利公开，201210024817.3

• 规范

• 著作

• 主要课程

• 主编教材

• 教改项目

• 科研奖励

2016年 德国优秀青年科学家提名奖
2015年 德国洪堡基金会索非亚-科瓦雷夫斯亚奖（全球第七位华人）
2014年 欧盟第七框架玛丽居里国际人才计划（FP7 Marie Curie International Incoming Fellow）国际人才称号
2010年 英国计算力学辛科维奇最佳博士学位论文奖（年度唯一）
           （Zienkiewicz prize for best PhD thesis in computational mechanics in 2010）
2010年 欧洲计算力学协会年度最佳博士论文提名
2009年 英国工程计算力学协会年会最佳会议论文奖
2007-2010年 英国工程与物理科学研究委员会（EPSRC）陶乐茜研究生奖学金（DHPA）全奖
2007-2010年 英国海外研究生奖学金（ORSAS）全奖
2007年 同济大学美国LORD奖学金（研究生隧道方向设立一名）
2005年 同济大学优秀本科毕业论文奖（本科生地下方向设立一名）
2002/2003/2004年 同济大学优秀本科生奖学金

• 教学奖励

• 邀请报告

(1) ITN-INSIST短期课程，“不连续变形分析与三维接触”，德国魏玛包豪斯大学，2013年9月23日-27日
(2) ITN-INSIST短期课程，“无网格法”、“非连续问题的多场耦合分析”，英国卡迪夫大学，2013年7月29日-30日
(3) 参加第十三届计算与实验科学工程国际会议（ICCES），并作题为A conceptual framework for vibration-based monitoring of shield tunnel structure的专题报告，美国西雅图，2013年5月24日-28日
(4) 前往美国加州大学伯克利分校土木与环境工程系进行访问，并作题为Stability Assessment of Jointed Rock Slope Using Numerical Manifold Method（NMM）and Graph Theory的报告，2013年5月20日
(5) 前往维也纳农业大学岩土工程学院进行访问，并作题为Meshless methods for 3D fracture modelling: recent advances and challenges的报告，奥地利维也纳，2013年2月6日
(6) 在北京参加题为“岩石非连续变形分析”的短期课程，并作专题报告，2012年8月20-25日
(7) 前往澳大利亚西澳大学土木与资源学院访问，并作题为Meshless methods for 3D fracture modelling with level sets的报告，2012年1月31日

国际岩石力学学会非连续变形分析委员会委员（Committee member of ISRM Commission on Discontinuous Deformation Analysis - DDA）
国际岩石力学学会地质体多场耦合分析委员会委员（Committee member of ISRM Commission on Coupled THMC Processes in Geological Materials and Systems）
欧盟“第七框架”FP7 项目“Integrating Numerical Simulation and Geometric Design Technology”（FP7-PEOPLE-2011-ITN-INSIST） 三维断裂课程特邀专家
西澳大学工程数理学部（Faculty of Engineering, Computing and Mathematics）客座教授 （Adjunct Professor）
河海大学力学与材料学院兼职教授
中国土木工程学会建设管理与青年工作专业委员会副主任委员
哈萨克斯坦国家自然基金评委
德意志研究基金（DFG）评委
中国力学学会计算力学专业委员会非连续性有限元分委会委员
国际期刊 Theoretical and Applied Fracture Mechanics 编辑委员
国际期刊 Engineering Geology 编辑委员
国际期刊 KSCE Journal of Civil Engineering 副主编
国际期刊 Frontiers of Structural and Civil Engineering 责任编辑
Computational Mechanics， International Journal of Computational Methods，Geotechnique，Computer Methods in Applied Mechanics and Engineering，Computer Modelling in Engineering & Sciences，Journal of Rock Mechanics and Geotechnical Engineering，Engineering Geology 等期刊审稿人

• 招生信息

• 历届学生